Tack :)
Utskriftsvy
Igår blev det en tur i garaget igen.
Inte mycket att visa på bild:
Bifogad fil 11523
Den observante kan se lite skillnader :)
*Slipat hela bilen inuti med bosch slipduk för att matta ner allting så färgen skall fästa bra
*Demonterat div pyssel som är i vägen för att måla såsom clips, kablar, handbroms mm
*Åtgärdat en massa små ytrost-skador med stålborste och bläster, främst runt dörr och bagage-öppningarna
Blir nog lite mera finlir på några ställen innan jag ger mig på att ge insidan samma behandling som undersidan men bra på väg mot enhetlig färg inuti :)
Blev inget garage förra veckan, blev VAB istället. Sonen och jag hade väldigt tråkigt så jag botaniserade i lagret av kuliga grejer och tog fram en Tamiya Golf 3 VR6 RC bil från 90-talet, NIB som jag köpte för länge sen som aldrig blivit byggd. Tillsammans med en massa vintage tuning-delar, så som kolfiber chassi, aluminium dämpare, andra lager, motor osv så hade vi plötsligt ngt att göra :)
Bifogad fil 11540
Bifogad fil 11539
Bifogad fil 11541
Så en viss typ av golf-mek blev det :D
Igår så var det friskt så det blev en kväll i garaget. Mera finlir inuti bilen och nu är all små-rost fixad också och allting har ett lager 2K epoxy. Inga nya kort på det dock. Nästa gång hoppas jag gå över allt med andra lagret.
Snygg.[emoji1303]
Som gammal RC entusiast blir man ju glad att se denna.
Skickat från min iPhone med Tapatalk
Riktigt snyggt! Hade den karossen funnits att köpa när jag byggde ett Tamiyachassi för ett antal år sen hade jag absolut skaffat en och gjort en replica av min dåvarande GTI (med fel antal dörrar dock) för att ha som "stå på hyllan"-kaross.
Tidsenliga tuningdelar till såna bilar växer inte heller på träd precis. Och sedan Tamiya gjorde ett nysläpp av TA-02 chassit för några år sen så lär dom där kolfiberplattorna vara hett eftertraktade bland RC nostalgikerna :)
Blev en tur i garaget i onsdags också.
Men jag blev inte klar med 2K epoxy inne i bilen. Tyvärr tog färgen slut innan dess :(
Ny färg är beställd och ska enligt appen landa hos mitt ombud idag så det borde lösa sig under nästa vecka.
Lite bilder på det halvfärdiga resultatet:
Bifogad fil 11566
Bifogad fil 11567
Bifogad fil 11568
Ny färg kom med posten och nu har jag målat klat med 2K epoxy inne i bilen. Anledningen att jag penslar (om nån nu undrar) är för rostskyddets skull. Nu har jag arbetat in färgen med en pensel i alla hörn och glipor samt alla svetsfogar. Eftersom jag tätat allt underifrån kan jag ovanifrån fylla på alla svetsfogar och skarvar med färg tills de är fyllda. Då blir rostskyddet så bra som det kan bli utan att ED behandla bilen. De hade aldrig gått att få till om jag sprutat.
Nackdelen med detta är såklart att det blir en del penseldrag, rinningar och andra småfel på lacken. Men under mattan i bilen så känns det viktigare med rostskydd.
Bifogad fil 11573
Bifogad fil 11574
Så nästa gång blir det att sätta igång med karosserikitt inne i bilen :)
Blev inget garage förra veckan. Blev att umgås med familjen och ta hand om sjuk hund.
Men igår blev det en kortis, hann iaf lägga karosserikitt på det mesta inuti bilen. Behövs på några ställen till och säkert lite komplettering på det som är gjort när det torkat och krympt:
Bifogad fil 11597
Så mera tätning nästa gång!
Igår så avslutade jag tätningsarbetet med karosserikitt. Blev ett andra lager på de flesta ställena och komplettering på några ställen jag inte hann sist.
Färgen har också kommit. Köpte 2K billack på burk från bilfärg.se. Har gjort det flera ggr förut och skall man bara lacka lite så är det otroligt smidigt och blir nästan lika snyggt som spruta.
(man kan se burkarna på bilderna)
Blir först ett tunt lager 2K sealer (det finns många olika sorters färg här och var inne bilen och för att säker på att det inte reser sig kör jag sealer först). Sen blir det några lager 2K filler grundfärg. När det är klart så får jag se hur det ser ut, ev så våtslipar jag den lite innan täckfärg.
Har påbörjat maskera inför lack också som synes på bilderna:
Bifogad fil 11615
Bifogad fil 11616
Om jag får till ett längre besök i garaget nästa vecka så blir det lack då! :)
ÄNTLIGEN någon som använder 2K.
Det blir faktiskt tillräckligt bra med burk om än dyrare.
Men valet att kunna lacka som du gör är mycket enklare.
2K går dessutom både att slipa och polera på ett bra sätt om man gör bort sig lite.
Jo, alltså den typ av 1K sprayburksfärg man kan köpa hos de stora aktörerna (Biltema, Jula, Mekonomen osv) är helt meningslös. Typ 95% thinner och går att tvätta bort med valfritt bilvårdsmedel.....
Sen blir ju 2K på sprayburk dyrare, helt klart. Men sjukt smidigt. Inget slabb med blandning, ingen timmeslång rengöring av sprutan och inget pyssel med att fixa helt ren luft osv. Jobbade extra på en billackeringsfirma när jag studerade och lackade mycket med spruta i box och har man de möjligheterna så är det snäppet bättre :) men för hemmabruk funkar detta kanon.
Instämmer.
Igår blev det en massa städning, massa klibbduk, 2K sealer och till slut 2K filler. Resultatet blev jag nöjd med, dock hade jag missbedömt hur mycket färg det skulle gå åt så det räckte inte till 2 lager utan bara ett så jag har beställt mera från bilfärg.se.
Bifogad fil 11639
Så nästa gång blir det målning av ett andra lager.
Det är en himla skön känsla när man äntligen får se karossen i en enda färg igen. Oavsett om det är senapsgult eller primergrått. :)
Bilfärg.se levererade ny färg hem på ett par dagar så igår vart det lackering med fler lager 2K Filler. Nu är jag nöjd med hur det täckt och tjockleken på färgen. Några bilder (ser iofs ut som innan):
Bifogad fil 11649
Bifogad fil 11650
Bifogad fil 11651
Nästa steg kräver lite mera planering. Baslack skall på i flera lager, sen skall den härda några h (max 24) och sen skall klarlack på i flera lager så det räcker inte med en onsdagskväll utan det krävs en hel dag alt en kväll + en morgon i följd. Får se om jag kan hitta några luckor i outlook... :confused:
Fantasktiskt att se projektet komma närmare sin slutliga form. Lackeringen är en av dom saker som verkligen lyfter det slutliga resultatet efter allt slit med rost och skit. :)
Igår var det äntligen dags, lackering inuti bilen :D
Materialet:
Bifogad fil 11658
Färgen, LA3Z röd metallic Pearl, kräver rätt kulör på underlaget då den är svagt genomskinlig. Så 3 burkar bruten vit som underlag, 6 burkar röd metallic bas och 6 burkar 2K klarlack.
Efter 3 lager metallic blev det såhär:
Bifogad fil 11659
Bifogad fil 11660
Sen åkte jag hem och det fick härda ca 3h.
Efter 3 lager 2K klarlack:
Bifogad fil 11661
Bifogad fil 11662
Bifogad fil 11663
Bifogad fil 11664
Inte på något sätt en "utsida"-lack men för att vara under mattan i bilen så blev jag helt klart nöjd. Nu är det bra rostskydd och det är rätt kulör och enhetligt.
Så j*vla skönt att ha kommit till att bilen börjar få färg!
Nästa gång blir det att ta bort lite maskering och sen ta tag i att täckmåla bilen svart under :)
Snyggt jobbat! Jag förstår att det är härligt att äntligen börja få färg på sakerna. :)
Karosskulör på insidan. Det har man inte längre på nyare bilar!
Snyggt!