handdator

Visa fullständig version : 012600 - Intake Manifold Runner Control Golf GTI Mk5



loadmaster
2016-09-26, 00:44
Har fått felkod 012600 - Intake Manifold Runner Control.
Om man söker på detta hittar man en hel del, med andra ord verkar det vara ett vanligt problem. Dock är det olika problem på själva insuget. Runner flaps, valve m.m.
Har fått både " P3138 - 008 - Regulation Deviation - Intermittent "
och " P3137 - 001 - Basic Setting not Completed - Intermittent "

Den sistnämnda inträffade först.
Vad jag har förstått måste man byta hela insuget, då det inte går att byta vissa delar?
Skulle vara intressant och höra om andra haft samma problem och vad ni gjort för att lösa problemet. Ingen Check Engine lampa lyser, dock lyser avgaslampan. Bilen går helt ok för övrigt, dock kanske lite svajande turbotryck.

Bilen är en Golf GTI Mk5 -07

Alle47
2016-09-26, 22:21
Jag kan inte direkt svara på vad problemet är här. Men om det nu är motorn som styr flapsen som spökar så har jag en polare som säljer en sån på blocket.

Har du nollat koderna med tex vcds och får samma igen?

Skickat från min E6553 via Tapatalk

Mange.k
2016-09-27, 12:56
Jag har en eller 2 flappmotorer liggandes

maccke
2016-10-04, 10:23
19594/P3138/012600 - Intake Manifold Runner Control: Regulation Deviation

Possible Causes
Intake Manifold Runner Control Basic Setting not performed
Wiring from/to Intake Manifold Runner Control faulty
Intake Manifold Runner Control faulty

Possible Solutions
Perform Intake Manifold Runner Control Basic Setting
Check/Repair Wiring from/to Intake Manifold Runner Control
Check/Replace Intake Manifold Runner Control

Special Notes
When found in Engine: 2.0l TFSI, perform Basic Setting.
Check TSB 01-08-12 or 2018402 (NAR) North American Region vehicles only.
Check Engine Control Module Software Version, if necessary perform Update.
Replace Intake Manifold Runner (V157) with updated part.
Additional information may be found by searching RVU 24M2 / O3 (Exp. date November 30, 2011) or calling the VW dealer and checking the VIN.
When found on Direct Injection engines, such as the 2.0l TFSI, in combination with system too lean or similar faults indicating a vacuum leak diagnose them because "Regulation Deviation " may be the result of a vacuum leak.

- - - Uppdaterad - - -

19593/P3137/012599 - Intake Manifold Runner Control: Basic Setting not Completed

Possible Causes
Intake Manifold Runner Control Basic Setting not performed

Possible Solutions
Perform Intake Manifold Runner Control Basic Setting

Special Notes
When found in Engine: 2.0l TFSI
Perform Basic Setting.
Check TPL 2016420 (RoW)
Check Engine Control Module Software Version, if necessary perform Update.
Replace Intake Manifold Runner (V157) with updated part.
Check TSB 01-08-12 or 2018402 (NAR) North American Region vehicles only.
Check Engine Control Module Software Version, if necessary perform Update.
Replace Intake Manifold Runner (V157) with updated part.
Additional information may be found by searching RVU 24M2 / O3 (Exp. date November 30, 2011) or calling the VW dealer and checking the VIN.

loadmaster
2016-10-04, 11:09
19594/P3138/012600 - Intake Manifold Runner Control: Regulation Deviation

Possible Causes
Intake Manifold Runner Control Basic Setting not performed
Wiring from/to Intake Manifold Runner Control faulty
Intake Manifold Runner Control faulty

Possible Solutions
Perform Intake Manifold Runner Control Basic Setting
Check/Repair Wiring from/to Intake Manifold Runner Control
Check/Replace Intake Manifold Runner Control

Special Notes
When found in Engine: 2.0l TFSI, perform Basic Setting.
Check TSB 01-08-12 or 2018402 (NAR) North American Region vehicles only.
Check Engine Control Module Software Version, if necessary perform Update.
Replace Intake Manifold Runner (V157) with updated part.
Additional information may be found by searching RVU 24M2 / O3 (Exp. date November 30, 2011) or calling the VW dealer and checking the VIN.
When found on Direct Injection engines, such as the 2.0l TFSI, in combination with system too lean or similar faults indicating a vacuum leak diagnose them because "Regulation Deviation " may be the result of a vacuum leak.

- - - Uppdaterad - - -

19593/P3137/012599 - Intake Manifold Runner Control: Basic Setting not Completed

Possible Causes
Intake Manifold Runner Control Basic Setting not performed

Possible Solutions
Perform Intake Manifold Runner Control Basic Setting

Special Notes
When found in Engine: 2.0l TFSI
Perform Basic Setting.
Check TPL 2016420 (RoW)
Check Engine Control Module Software Version, if necessary perform Update.
Replace Intake Manifold Runner (V157) with updated part.
Check TSB 01-08-12 or 2018402 (NAR) North American Region vehicles only.
Check Engine Control Module Software Version, if necessary perform Update.
Replace Intake Manifold Runner (V157) with updated part.
Additional information may be found by searching RVU 24M2 / O3 (Exp. date November 30, 2011) or calling the VW dealer and checking the VIN.

Hittade liknande på Ross Tech:s hemsida faktiskt. tack ändå